RACK AND REEL FIRE HOSE is fully lined, FM approved, and has an acceptance test pressure of 500
psi and a service test of 250 psi. Each section comes already folded for ease of installation on pin
racks. NOTE: This inexpensive lightweight hose is designed for use as emergency fire hose only! Not
intended for wash down or any other purpose.
psi and a service test of 250 psi. Each section comes already folded for ease of installation on pin
racks. NOTE: This inexpensive lightweight hose is designed for use as emergency fire hose only! Not
intended for wash down or any other purpose.
FIRE HOSES, RACKS, NOZZLES
RUBBER COVERED FIRE HOSE has a burst pressure of 800 psi, an acceptance
test pressure of 500 psi and a service test of 250 psi. Abrasion and heat-resistant
nitrite, synthetic, 1-piece cover and liner is impervious to water, oil, gas and most
chemicals. Lightweight and virtually kink- resistant for ease of handling. No drying
required! Tested and coupled to NFPA 1961 standard. Available with aluminum
couplings only 50X 1 1/2
ref:128 100 X 1 1/2 ref:248
Cast brass, 1 1/2" STRAIGHT
STREAM NOZZLE with 1/2"
discharge. This 10" nozzle is ideal
for industrial wash down
applications where powerful straight
streams are needed. Satin finish.
STREAM NOZZLE with 1/2"
discharge. This 10" nozzle is ideal
for industrial wash down
applications where powerful straight
streams are needed. Satin finish.
POLYCARBONATE NOZZLES are an
economical alternative to the more expensive
brass models with the same array of spray
patterns. Ideal for locations where theft of
brass versions is a concern. NOTE: Intended
for firefighting use only.
economical alternative to the more expensive
brass models with the same array of spray
patterns. Ideal for locations where theft of
brass versions is a concern. NOTE: Intended
for firefighting use only.
semi-automatic PIN RACKS with 25
movable pins feature an automatic
release mechanism, keeping water out
of the hose (when valve is opened)
until the last fold is removed. UL listed
and FM approved.
ref:3940
movable pins feature an automatic
release mechanism, keeping water out
of the hose (when valve is opened)
until the last fold is removed. UL listed
and FM approved.
ref:3940
ALUMINUM BREAK CAPS serve the
same function as the brass and plastic
caps. Not threaded, easily broken with
a hydrant/spanner wrench. Available in
aluminum or red aluminum.
ref:520
same function as the brass and plastic
caps. Not threaded, easily broken with
a hydrant/spanner wrench. Available in
aluminum or red aluminum.
ref:520
16-gauge steel. Welded steel 1" x 3/16" reel bracket with a 1 1/2" x 1/4" wall
bracket, provides superior support. Wall bracket swings 180° and easily
adapts to pipes (1 1/2" to 3"), with optional pipe bracket set PBSET. Comes
with reusable hook and loop back strap to prevent accidental unrolling of
hose .Two sizes for different lenght's of hose.
ref:11110
bracket, provides superior support. Wall bracket swings 180° and easily
adapts to pipes (1 1/2" to 3"), with optional pipe bracket set PBSET. Comes
with reusable hook and loop back strap to prevent accidental unrolling of
hose .Two sizes for different lenght's of hose.
ref:11110
 |  |  |  |  |  |  |
Red enameled steel HUMP RACKS
provide easy, stress-free fire hose
storage. Supports hose weight at the
center, relieving strain on the folded
ends and couplings, which increases
hose service life. Used for 1 1/2 or 2
1/2 inch hose. ref:6765 and 8310
provide easy, stress-free fire hose
storage. Supports hose weight at the
center, relieving strain on the folded
ends and couplings, which increases
hose service life. Used for 1 1/2 or 2
1/2 inch hose. ref:6765 and 8310
BRASS HEXAGON ADAPTERS used to change threads or to connect 2 males.
Adapters can go from pipe thread to hose thread. Or hose thread to pipe thread
They can increase or decrease the connection size.
Solves a lot of problems for little money, in stock now, We ship the same or next day.
Adapters can go from pipe thread to hose thread. Or hose thread to pipe thread
They can increase or decrease the connection size.
Solves a lot of problems for little money, in stock now, We ship the same or next day.
BRASS DOUBLE
SWIVEL ADAPTERS
used to connect 2
male hose threads.
(this is one that will
save you from that
embarrassing
moment when you
realize you have two
male ends)
SWIVEL ADAPTERS
used to connect 2
male hose threads.
(this is one that will
save you from that
embarrassing
moment when you
realize you have two
male ends)
RACK COVERS ( In Spainsh and
English)are made of durable vinyl to
protect your equipment from dirt and
other natural elements. Highly visible,
yet discourages tampering. Hook and
loop closures ensure proper fit and
easy access.
English)are made of durable vinyl to
protect your equipment from dirt and
other natural elements. Highly visible,
yet discourages tampering. Hook and
loop closures ensure proper fit and
easy access.
SUMMER SPECIAL
LENGTH QUANTITY PRICE
1 1/2 X 50 FT 1-2 $108.00
1 1/2 X 75 FT 1-2 $132.00
1 1/2 X 100 FT 1-2 $150.00
PRICE INCLUDES FREE DELIVERY IN
THE LOS ANGELES AREA.
CALL FOR QUANTITY DISCOUNTS
LENGTH QUANTITY PRICE
1 1/2 X 50 FT 1-2 $108.00
1 1/2 X 75 FT 1-2 $132.00
1 1/2 X 100 FT 1-2 $150.00
PRICE INCLUDES FREE DELIVERY IN
THE LOS ANGELES AREA.
CALL FOR QUANTITY DISCOUNTS
PROTECT WHAT YOU LOVE AND VALUE FROM FIRES WE BOUGHT A TON OF HOSES AND CAN PASS THE
SAVING ON TO YOU. DEALERS ARE WELCOME.
SAVING ON TO YOU. DEALERS ARE WELCOME.
| FREE DELIVERY IN THE GREATER LOS ANGELES AREA CALL US: 1-866-701-6518 |
| FREE DELIVERY IN THE GREATER LOS ANGELES AREA CALL US: 1-866-701-6518 |
| FREE DELIVERY IN THE GREATER LOS ANGELES AREA CALL US: 1-866-701-6518 |